Perfect for using the planer outside the shop where it made interesting, unfamiliar waste, and finished beautiful scarph joints.

Click image above for larger image.

Click image above for larger image.

Click image above for larger image.

Click image above for larger image.

And, we prove again that one can never own enough clamps.

Click image above for larger image.

Click image above for larger image.

Use the planer to finish up a few more laminates for the gunwales. I hooked the shop vac to the planer. Slick.

I moved the boat outside, then used the belt sander to round-over the chine exteriors (photos below); getting ready for cloth. Also sanded (to bare wood) port side where its outwale will be attached with glue. Also sanded the entire exterior with a oscillating sander.

Click image above for larger image.

Click image above for larger image.

Click image above for larger image.

By the way, here is a line drawing of the sail plan as designed by Bevin:

I'm quite sure I'll not use Bevin's sail plan. "Mic" Storer has described why the "balance lug" sail might be a better one for this boat. Here's a link.