4/14/11 --
Larry K. gave me some microballoons today. The top two photos show the boat as I left it yesterday, with the transom and aft-most frame glued and weighted for curing.
(Click for larger image.)
(Click for larger image.)
(Click for larger image.)
With the weights in place on the aft-frame, thickened epoxy was spread on the foreward and middle frame, and the stem. The bottom was lowered into place and weighetd. Next step will be to flip the boat and fillet the interior at the chines.
Looked at some wood today for use as gunwales.
Open wide:
(Click for larger image.)
(Click for larger image.)
|