Learned I'm "on the list" for MacSkier to be at ACBS Show this coming Saturday.
Picked up a piece of marine plywood for fuel tank "shelf" -- cut shelf piece to 3/4 x 6 x 54 inches.
Removed clamps from access panel "ledges" for battery holder and tray for throttle/shift cables. Panels rest flush with floor; to be covered with glued-in carpet.
Painted another coat on a few items, and discussed painting of transmission with owner of Performance Auto Color in High Ridge.
Measured Cutlass bearing -- it's only 4" long.
Designed, made and primed a trim ring for battery access lid.
